Product highlights

LanoPro Chain Oil 10 EAL Spray

LanoPro Chain Oil 10 EAL is a wire and chain oil spray with light brown colour, semi-dry thin film lubricant with excellent penetration and corrosion protection properties. It is an oil product which is completely non-toxic and does not create an environmental footprint.

LanoPro Chain Oil 10 EAL is a premium grade oil formulated for frequent use in harsh conditions, whilst minimising lubricant build up and abrasive particle contamination. Designed for maximum lubrication and protection against degradation and corrosion. The product forms a thin protective shield which is suitable for steel wires and chains where it is necessary with good lubrication and penetration. It is compatible with most mineral oils or other petroleum based products, a test before application is recommended.

SURFACE PREPARATION
All surfaces must be free of dust, oil, gravel, or peeling paint and all other foreign matters. However, the product may be applied on rusty metal without any primer or brushing. Prior pressure washing of the surfaces is recommended for optimal results.

APPLICATION
Use normal protective goggles to protect eyes. It is not necessary to take any special precautions for workers that use the wire and chain oil spray. The oil can be used on both wet and dry surfaces. Coverage rates will vary depending on porosity of surface as well as speed of the application. Avoid applying unless temperature is 0°C or higher.

Technical data
Flash point: >280°C
Viscosity at 40°C
Copper strip corrosion: 1a

LanoPro lubrication symbol

Lubrication

LanoPro corrosion protection symbol

Corrosion protection

LanoPro environmental friendly symbol

Environmentally friendly

LanoPro Chain Oil 10 EAL Spray

Suiteable for;

  • Chains and wires

Downloads